| View previous topic :: View next topic |
| Author |
Message |
RogerS
Joined: 26 Jan 2018
Posts: 4
|
 Posted: Sun Jul 22, 2018 2:25 am Post subject: Disconnecting cables to front doors |
 |
|
| I have to remove the front doors to 013294 in order for the panel beater to get to the edge of the front body panel. i cant see an easy way to unclip and disconect the electrical cables connection. Is there one or do you have to reterminate the connection block? Thank you Roger. |
|
| Back to top |
|
 |
david
Joined: 21 Mar 2008
Posts: 118
Location: Nottingham
|
| Posted: Sun Jul 22, 2018 12:15 pm Post subject: |
|
|
Hi,
Yes, you will need to remove the wires from the terminal blocks and re assemble afterwards.
Take careful notes and pictures and disconnect the battery!
David |
|
| Back to top |
|
|
RogerS
Joined: 26 Jan 2018
Posts: 4
|
| Posted: Wed Jul 25, 2018 7:57 pm Post subject: |
|
|
Thank you David i suspected that might be the case.
It looks like i need to replace the four rubber mounting blocks for the gearbox and engine, are they specific to AM? RogerS |
|
| Back to top |
|
|
Vrije
Joined: 23 Nov 2007
Posts: 440
|
| Posted: Thu Jul 26, 2018 7:30 am Post subject: |
|
|
| For engine mounts we use Land rovers e.g. Discovery 1 or RRClassic V8.About 2 pounds in UK. Transmount rubbers custombuilt at zilenz.nl (trillingdemper type 1, around 7 euros a piece) Margie |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
